Using a refrigerator without knowing these energy saving tips is too wasteful
Refrigerators are appliances that need to be plugged in regularly. To avoid wasting electricity, avoid damage, you should know these tips when using.
Do not leave the refrigerator empty
Leaving the refrigerator empty is a waste of energy, so keep enough food in the refrigerator. When the food is cold enough, they will cool each other, helping to equalize the temperature inside the refrigerator and the compressor will work less.
When the refrigerator does not have enough food to fill, you can put an extra bag of ice or cold water inside.
Do not store too many things in the closet
Although you shouldn’t leave the fridge empty, you shouldn’t just keep the food in it. Arrange things neatly and have openings to allow cold air to circulate evenly to help all foods be better preserved.
Putting too much food in the refrigerator can block the cold vents, the ventilation fan inside the refrigerator, the cold air will not be spread evenly around, causing the refrigerator to operate continuously and very quickly.
Keep the refrigerator in a cool place
When use the refrigerator You need to pay attention to the position of the cabinet so that it is reasonable. The refrigerator should be placed in a cool place, the back and 2 sides of the cabinet must be at least 10 cm from the wall to ensure heat dissipation. In addition, to circulate air and prevent moisture, you should place the refrigerator about 5cm from the ground.
Proper temperature regulation
If the refrigerator temperature is too high, the food will spoil easily because it is not cold enough, and if the temperature is too low, it will waste electricity. The suitable temperature for the freezer is about 15 degrees Celsius and the cooler is about 2-4 degrees Celsius.
Defrost the freezer periodically for frozen refrigerators
There are many refrigerators after a period of use, the freezer will appear a thick layer of snow, making the capacity of the refrigerator reduced as well as consuming power and occupying the interior area.
If the refrigerator does not have an automatic defrost mode, you should regularly defrost the refrigerator to increase the use area and save electricity for the family.
Clean cabinets regularly
Organize your fridge neatly, remove foods that have been left for a long time… to help limit bacteria and mold growth and improve heat dissipation inside the cabinet. Besides, you should also pay attention to cleaning the rubber gasket to ensure that the cabinet door is not open and does not leak heat, which consumes electricity.
(According to Healthy and Beautiful)
at Blogtuan.info – Source: vietnamnet.vn – Read the original article here