iPhone 14 Pro Max will have a noticeable change in screen
Leaked images from ShrimpApplePro account reveal that the top bezel of the iPhone 14 Pro Max is only 1.95mm thick. It’s significantly thinner than the 24.2mm bezel on the iPhone 13 Pro Max. The bezel of the iPhone 14 Pro Max is said to be about 21% thinner. The black lines should be symmetrical on all sides, giving the phone a rather well-balanced look, at least if the leak is to be believed.
On the other hand, if the distance between the top edge of the black groove section and the top edge is assumed to be 2.29mm. The chassis is said to be made of stainless steel, but there are rumors that the machine is made from a titanium frame. Contrary to old rumors predicting a flat lens design, the lens will slightly protrude about 4.18mm from the back of the device.
The lens on the iPhone 14 Pro Max is said to be a bit steamy
In addition to a few design changes, the iPhone 14 Pro Max is expected to have some strong configuration upgrades. Specifically, the device will be equipped with a main camera of up to 48MP, up from the current 12MP. As the number of pixels increases, the size of the individual pixels decreases.
The sensor size is said to be increased to 1/1.3 inch, up from 1/1.65 inch on the iPhone 13 Pro. On the other hand, a larger sensor means more light and brighter photos. But smaller pixel sizes will affect details and easily lead to noise.
Most likely, iPhone 14 Pro Max will be equipped with Apple A16 chip, LPDDR5 RAM up to 8GB. However, there are also rumors that the device will be equipped with the Apple A16 Pro chip, while other variants will use the improved A15 Bionic chop but named A16.
In addition, experts believe that the iPhone 14 Pro Max will be equipped with car accident detection and remove the traditional SIM slot to switch to using only eSIM.
Refer to Slashgear
at Blogtuan.info – Source: genk.vn – Read the original article here
