In the summer, the demand for installing air conditioners always increases; But you should not think that only technical staff need to know how to install air conditioners, and buyers do not. But the user himself also needs to know how to install it correctly – to be able to check if his home machine is standard or not.
1. Should make the living room and balcony partition
The first thing to consider when installing an air conditioner in the living room is the balcony, if you don’t have a glass door, you should make a sliding door partition between the living room and the balcony, this will save a lot of energy and be environmentally friendly. more school. Because no matter how carefully the balcony is covered, the temperature difference between the balcony in winter and summer is also huge.
2. Install the indoor unit higher
Try to install the indoor unit at a higher position, because the cold air sinks, in the summer we often use the air conditioner, so it should be installed at a higher position, so it is both environmentally friendly and saves electricity and efficiency. cooling effect is better.
The best indoor air outlet should not have a cover to improve air conditioning performance, not blowing the air directly onto the bed will not be good for our health.
3. Do not cover the outdoor unit
The outdoor unit must be installed on a hard wall, and protective measures must be taken for high-rise buildings to avoid possible safety hazards.
In particular, it is not recommended to cover the outer shell, this is very unnecessary, not conducive to heat dissipation, and affects the efficiency of use. Note: It is not recommended to install in strong sunlight because the irradiation position will reduce the life of the air conditioner. At the same time, there must be a certain distance between the outdoor unit and the indoor unit to avoid resonance and noise.
4. Choose the right capacity
To have a suitable place to install the air conditioner, you must first know the exact area or more specifically the volume of the family room. For a normal bedroom with an area of less than 20m2, an air conditioner with a capacity of 9,000BTU is enough; 12,000 BTU will be suitable for room area from 20 – 30m2; higher than 18,000BTU, but usually bedroom only need 2 lines of 9,000 and 12,000 BTU air conditioners are enough.
Being careful in choosing an air conditioner will help save a lot of monthly electricity bills for your family.
5. Copper tube size
Copper pipes for air conditioners must correspond to the capacity to achieve high efficiency. As with the 1 HP (9000 BTU) machine, copper pipes with an outer diameter of 10 mm are used; 1.5 HP (12000 BTU) machines using 10 mm or 12 mm tubes; 2 HP (18000 BTU) machine using 12 mm tube; 2.5 HP (24000 BTU) machine using 16mm tube…
Similar to the size section, the length of copper pipes connecting the outdoor and indoor units must also comply with the installation requirements specified by the manufacturer.
If the copper pipe is too short, the solvent/gas will not return to the compressor in time and become blocked, causing serious damage. If the copper tube is installed too long, it will slow down the chiller.
at Blogtuan.info – Source: Eva.vn – Read the original article here