How to start a car, handle it quickly when the smart key suddenly runs out of battery
Depending on the structure of the car models, there are many ways to start the engine when the key is out of battery, but most of them follow a certain process. The important thing is that you know what it is.
And here’s what you need to know to handle the situation.
To avoid situations like the smart key running out of battery, the driver should equip an additional mechanical key.
1. Vehicles using remote control
Currently, cars from popular to high-end use remote control keys. Before leaving the car, users just need to press the lock button on the remote, the car will automatically close the door. And vice versa, if you want to open the car door, just press the unlock button.
With these models, when the remote control runs out of battery, you just need to put the key in the ignition and turn it on to the ON position.
At this time, the alarm system will be activated, the siren will sound and the emergency lights will flash continuously. However, leave it alone. You maintain this situation for 3 minutes and then turn to the “Start” step, the car will start, the lights and horn will stop working and you can drive normally.
Some notes when using a car remote control key:
– Remember to carefully check the car doors after locking with the car remote control key, in case there is a car door that has not been locked due to interference from the key.
– Check the battery level of the car remote control key regularly.
– Do not leave the remote control key in high temperature, humid, high magnetic places, out of reach of children, keep a distance from places such as radio stations, broadcasting devices. strong radio.
– At the same time, you should also keep the code of the car remote control key to be able to redo the key when lost or damaged.
2. Vehicles using the first generation smartkey system
This is a system with a knob in the electric lock that is similar to the type that uses a mechanical key and does not have a start / stop button.
If the smart key runs out of battery, insert the key into the knob, press it lightly and start the engine normally.
3. Vehicles using the second generation smartkey system
With these cars, the car will have a slot to plug in the remote control to start in an emergency situation. Depending on the vehicle, this slot can be located just below the start / stop button, near the ashtray below the air conditioning panel or in the center armrest compartment, between the two seats of the front row.
Accordingly, in case the key runs out of battery and you want to start the car, plug the remote control into this slot, gently press it to hold it and then press the start / stop button as usual.
However, this slot is for use in emergency situations and for the company to install a new key, not a place to recharge the remote control battery as many people think.
4. Vehicles using the third generation smartkey system
With this vehicle, the slot to plug in the remote control has been removed, if you want to start the car in an emergency situation, just use the keyless end of the remote control and press the start/stop button to run. normal car.
When does the smart key need to change the battery?
Most according to the recommendations of manufacturers, under normal conditions, the battery of the key can be used for 2-3 years. However, depending on weather conditions, frequency of use (or interference), the life of the battery may decrease.
Therefore, people should actively change the battery after more than 1 year of use, or when they notice that the key shows signs of flickering, does not receive the signal or is difficult to use at a distance, it should be replaced.
At the same time, you should also actively prepare a few more batteries of the same type to replace yourself when necessary.
at Blogtuan.info – Source: autopro.com.vn – Read the original article here
