Experience cleaning car air filters to avoid fuel consumption
When to replace the engine air filter?
According to the manufacturer’s recommendations, the engine air filter should be cleaned every 5,000 km and replaced after 20,000 km. However, with the actual use conditions as well as the increasingly polluted environment, we should shorten this detailed inspection period.
Should be cleaned every 3,000 km or once a month and replaced after 15,000 km. However, if during cleaning, if you find that the air filter is torn, moldy or difficult to clean, it is time for the driver to replace this detail.
According to the manufacturer’s recommendations, the engine air filter should be cleaned every 5,000 km and replaced after 20,000 km.
Air filter cleaning process
We can completely clean the car engine air filter at home during our free weekend. The process of self-cleaning the car engine air filter is as follows:
Step 1: Locate the air filter in the engine compartment
The air filter is usually located behind the engine’s intake, just behind the grille. We just need to follow this pipe to get to the location of the engine air filter. Manufacturers usually place the air filter in a protective box designed to be round or square.
The air filter is usually located behind the intake of the engine, just behind the grille
Step 2: Remove the air filter from the protective case
Depending on the manufacturer, the protective box is designed in the form of a holder or a screw. They are simply designed to be easily removed by hand or with a wrench. The air filter is located just below the protective box cover and we can take it out by hand.
Step 3: Clean the air filter
Use the steam nozzle to blow away the dirt on the air filter. Spray from inside to outside and from top to bottom. Note: Do not clean the air filter with water or any cleaning chemical solution. In addition, do not use a brush, broom or sharp object to clean the dirt on the air filter, as this may cause the filter membrane of the air filter to be torn and ineffective.
Step 4: Install the air filter back to the original position
Before installing the air filter back to the original position, we use a dry cloth to wipe away the dust and dirt inside the protective box. Then tighten the nuts or retainers as before.
at Blogtuan.info – Source: danviet.vn – Read the original article here
