How to start the car when the smart key runs out of battery
In case the smart key runs out of battery, depending on the structure of each car model, the driver can still open the door and start the car normally before replacing the new battery for the key.
Currently, cars from popular to high-end use remote control keys. With these models, when the remote control runs out of battery, the operator only needs to put the key in the ignition and then turn it on to the ON position.
At this time, the alarm system will be activated, the siren will sound and the emergency lights will flash continuously. The driver maintains this condition for 3 minutes and then turns to the “Start” step, the car will start, the lights and horn will stop working and can drive normally.
Some notes when using a car remote control key:
– Carefully check the car doors after locking with the car remote control key, in case the car door has not been locked due to interference from the key.
– Check the battery level of the car remote control key regularly.
– Do not leave the remote control key in high temperature, humid, high magnetic places, out of reach of children, keep a distance from places such as radio stations, broadcasting devices. strong radio.
– At the same time, you should also keep the code of the car remote control key to be able to redo the key when lost or damaged.
This is a system with a knob in the electric lock that is similar to the type that uses a mechanical key and does not have a start / stop button.
If the smart key runs out of battery, insert the key into the knob, press it lightly and start the engine normally.
With these cars, the car will have a slot to plug in the remote control to start it in an emergency situation. Depending on the vehicle, this slot can be located just below the start / stop button, near the ashtray below the air conditioning panel or in the center armrest compartment, between the two seats of the front row.
Accordingly, in case the key runs out of battery and you want to start the car, plug the remote control into this slot, gently press it to hold it and then press the start / stop button as usual.
However, this slot is for use in emergency situations and for the company to install a new key, not a place to recharge the remote control battery as many people think.
With this vehicle, the slot to plug in the remote control has been removed, if you want to start the car in an emergency situation, just use the keyless end of the remote control and press the start/stop button to run. normal car.
at Blogtuan.info – Source: danviet.vn – Read the original article here