In the peak season, apply now so that the bill at the end of the month does not increase rapidly
Refrigerator is an indispensable household appliance in today’s families with the main use being to preserve food. In the fast-paced life, many people choose to go to the supermarket to buy food to store for a week to save time shopping.
Refrigerators are generally used all year round. Especially in the summer, we use this device significantly more. Along with that, the electricity bill also increased dramatically. To save energy and prolong the life of your refrigerator, you can refer to the ways below. These tips will not only help you save on your electricity bills, but also help protect our environment:
1. Choose or upgrade to an energy-saving series
In the past, electronic devices in general consumed a lot of energy. However, scientists have researched and improved constantly. As a result, current models of refrigerators have been upgraded in both appearance, performance, and energy-saving capabilities.
Models of refrigerators introduced 5 or 10 years ago can use twice as much electricity as today. If your cabinet has been in use for many years, you should probably consider replacing it with a new, more energy-efficient model.
When considering buying a new refrigerator, pay attention to its physical features as well as its technology. Freezer models, freezers that do not freeze are often more energy-efficient than other models.
2. Put the refrigerator in a cool place
The location of the refrigerator can affect how well it works. Make sure the cabinet is located away from heat sources such as ovens and radiators. At the same time, you should also keep the cabinet in a location away from direct sunlight.
Illustration. Photo: Internet
When placing the cabinet, you should leave at least 5 cm of free space around the sides, back and top for ventilation. Without this air gap, your cabinet will not be able to drain heat from the compressor. This causes your refrigerator to overheat, hindering normal operation and reducing its service life.
3. Close the cabinet door carefully after each use
Many families have small children or a little carelessness of adults leads to the cabinet doors not being closed tightly. This causes the cool air to escape and the hotter air outside to enter instead.
In order to maintain a normal temperature, the device will increase the cooling rate which in turn results in power consumption. To minimize this situation, you should limit the opening of the refrigerator door, do not open it for too long and close it carefully to reduce the burden on the device.
4. Keep the fridge organized
Many people want to save energy but often skip this step. The reason is because they think that how the food is placed in the refrigerator does not affect the cooling process of the refrigerator.
However, according to expert analysis, the less time you spend searching for food with the refrigerator door open, the less the condenser has to work to maintain the temperature. Plus, if you organize your refrigerator properly, food will also last longer.
5. Maintain a fixed amount of food
When the refrigerator is full, there will be less free space. Therefore, the cabinet will be reduced, not having to work too hard to save energy.
Illustration. Photo: Internet
When the closet is full of items, the items will help keep each other cool. You can keep the amount of food in the refrigerator at least 2/3 of the space. If your refrigerator is too big, add water bottles in both compartments.
On the other hand, we should not put too many things to maintain the circulation of air inside. Also, keep an eye on the vents and make sure they are not blocked for the refrigerator to work at its best.
6. Store food properly
Experts recommend using refrigerated containers to preserve all food. Glass containers are better than plastic ones because glass absorbs and retains cold better. Moisture from the food will make the internal temperature difficult to stabilize. Therefore, we should cover food and liquids carefully to avoid excessive operation of the cabinet motor.
7. Do not put hot food in the refrigerator
Putting hot food in the refrigerator will increase the temperature of the air inside, so the appliance will have to increase capacity to maintain the temperature. Some families worry that leaving food out will spoil quickly, but the reality is that leftovers should reach room temperature before being refrigerated.
8. Check the gaskets regularly
The gaskets around the refrigerator door act as a barrier between the cool air inside and the warm air outside. When there is a problem with the gasket, warm air will enter the cabinet. As mentioned above, the overflow of hot outside air will cause the refrigerator to work harder, increasing power consumption.
Illustration. Photo: Internet
To prevent this, we should keep the doors clean and replace them if we notice any cracks or tears.
09. Periodic cleaning
The condenser coils on your refrigerator are important in keeping the internal temperature cool. However, over time, they can accumulate a serious amount of dust if not cleaned.
When we clean it regularly, we not only save money on electricity, but we can also prolong the life of our equipment. Just remember to unplug the appliance when cleaning and use a vacuum cleaner or brush to get the most out of it.
10. Monitor the actual temperature inside the refrigerator
The temperature you set the refrigerator will not coincide with the actual temperature. The air inside the refrigerator may be slightly warmer or slightly cooler than the temperature shown on the dial. The ideal temperature is between 2.2 degrees Celsius and 3.3 degrees Celsius. If you use a thermometer and find that the number is outside this threshold, it should be adjusted. This will result in significant energy savings.
11. Turn on power saving mode
While not a feature on all refrigerators, if your unit has a power saver or sleep mode. If the refrigerator does not have to hold too many items, using the power saving mode will reduce energy consumption.
By following these simple tips, you will not only improve your appliance’s energy efficiency, but also extend the life of your refrigerator, thereby saving a lot of potential costs.
According to Beko
at Blogtuan.info – Source: Kenh14.Vn – Read the original article here
