5 steps to clean your car’s air filter
In recent years, smog and air pollution have increased significantly, affecting people’s health. Accordingly, air quality has gradually become one of the key issues, contributing to the fever of masks, masks and air purifiers.
Many people also know that, car It is the most polluted place. Therefore, they used car air filters to minimize this situation. However, misconceptions and wrong usage are making car air purifiers unnecessarily useless.
The main source of pollution in cars comes from two aspects: One is the adhesive used in the car assembly process and the other is the paint used in the interior accessories.
The air filter is responsible for protecting people from dust, microorganisms, allergens… Not only that, this filter will block the above things on its surface, so when it is cleaned If you use it for a long time or stick to a lot of dirt, it will be more difficult for the air to pass through the filter, reducing the efficiency of the air conditioner in the car as well as the protection task is no longer good.
Accordingly, this is the time when everyone should clean or replace the new air filter for their car. Although each vehicle and engine may have filters of different shapes, colors or sizes, the principles of operation are essentially the same.
First, you need to prepare a new air filter, a vacuum cleaner and a flat-head screwdriver.
Many car experts recommend that people should change the filter in their car every 2 years or after 30,000 km.
Here’s what you need to do to clean your car’s air filter:
– Step 1: Use a screwdriver to open the clamps:
When removing the cap, be careful as the tabs tend to bend, break or fall to the bottom of the engine compartment.
Once the clamps are removed, push the plastic air box back to relieve pressure on the filter knob. Slide the old filter out and set it aside.
– Step 2: Before replacing the new filter, clean the bottom of the air box with a vacuum cleaner:
If your filter is washable, spray filter cleaner on both sides and soak the filter for 10 minutes to wash away dirt.
Be careful not to let the filter dry out.
– Step 3: Rinse the filter with cool water with low pressure from the cleaned side and then gradually outward to push the dirt out:
Keep doing this until all the detergent stains are gone.
Step 4: After cleaning, shake off excess water and let the filter dry completely:
To make the drying process faster, you should use a sunny day to dry the filter. Do not apply oil until the filter is completely dry.
– Step 5: Apply oil to the top of the filter ring on each fold, keeping the nozzle about 7.5 cm from the filter ring:
Touch the dry areas with your hands until the oil is evenly coated, then let the oil soak for about 20 minutes.
One caveat, however, too much oil or not allowing enough time for the filter to dry completely can cause the air flow sensor to fail, so do it carefully.
There are many types of car air purifiers on the market today. However, not all types work well and achieve high efficiency. Therefore, you should consult and choose to buy the best car air purifier to use.
Some notes when using a car air purifier:
+ Do not expose the device to direct sunlight. Prevent the machine from overheating leading to machine damage.
+ To fix the machine, avoid moving the machine while in use, causing it to fall or push.
+ Do not let young children sit near the operating machine, especially the ozone machine. This avoids the respiratory system and skin of the child being affected, causing illness for the child.
+ For machines using ozone technology, you should only let the machine operate within 10-15 minutes. After the machine has deodorized, you should turn off the machine because this mode works for a long time, causing bad effects on health.
According to Autoblog
at Blogtuan.info – Source: Afamily.vn – Read the original article here
